HDMI® Over CAT5/6 Extender with Daisy Chain ST12MHDDC *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the most up-to-date information, please visit: www.startech.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Introduction.............................................................................................1 Packaging Contents.................................................................................................................................. 1 System Requirements............................................................................................................................... 1 Transmitter Unit.......................................................................
Introduction The ST12MHDDC HDMI® to CAT5 Extender kit lets you extend an HDMI® audio and video signal over a single Cat5 or Cat6 cable up to 330 feet (100 meters). The extender offers a highly scalable installation when used with the optional ST12MHDDCRP repeater units, which can be daisy-chained to additional displays at greater distances. Using ST12MHDDCRP repeater units (sold separately), you also have the option to daisy-chain the HDMI® over Cat 5/6 up to 30 broadcasting levels to over 100 displays.
Transmitter Unit Front View of Transmitter Back View of Transmitter 1. HDMI® IN 1. Power Jack 2. Power Status LED 2. HDMI Out Link (RJ-45 Connector) 3. Link Status LED Receiver Unit Front View of Receiver Back View of Receiver 1. HDMI® OUT 1. Power Jack 2. Power Status LED 2. HDMI® Out Link (RJ-45 Connector) 3. Link Status LED 4.
ST12MHDDCRP Repeater Unit (Sold Separately) The ST12MHDDC HDMI extender kit allows for additional displays to be added between the extender and receiver at any time using ST12MHDDCRP repeater units. Repeaters provide an HDMI output for a display, as well as 2 additional RJ-45 Jacks to potentially be daisy chained to 2 additional repeaters. Front View of Repeater Back View of Repeater 1. HDMI® OUT 1. Power Jack 2. Power Status LED 2. HDMI® Out Link #1 (RJ-45 Connector) 3. Link Status LED 3.
Preparing Your Site 1. Determine where the local video source (i.e. computer, Blu-ray Player) will be located and set up the device. 2. Determine where the remote display(s) will be located and place/ mount the display appropriately. 3. (Optional) If using ST12MHDDCRP Repeater unit(s) (sold separately), determine where the remote display will be located in relation to the other displays and place/ mount the display(s) appropriately. Repeaters allow for an additional 330 ft.
Hardware Installation 1. Install Transmitter Unit a) Position the Transmitter Unit near the video source (i.e. Computer, Blu-ray Player). b) Connect an HDMI® cable from the video source device (i.e. computer, Blu-ray Player) to the “HDMI® IN” on the Transmitter Unit. c) Connect the provided Transmitter Unit power supply. 2. Install RJ-45 terminated Cat5/6 Ethernet Cable a) Connect an RJ-45 terminated Cat5/6 Ethernet cable to the HDMI® Out Link (RJ-45 Connector) on the Transmitter unit.
3. (Optional) Install Repeater Unit(s) (sold separately) a) Position the Repeater Unit near the video display (i.e. television, projector) within 330 ft. (100 meters) from the level up device be it the initial transmitter or another repeater. b) Connect the video source to the HDMI® Out on the Repeater Unit using an HDMI® cable. c) Connect the Cat5/6 cable positioned in Step 2 to the”HDMI® In Link (RJ-45 Connector)” on the Repeater. Connect the Receiver Unit power supply.
Specifications 1x HDMI (19 pin) Local Unit Connectors 1x RJ-45 1x RJ-45 Female Remote Unit Connectors 1x HDMI (19 pin) Female Max Distance 100 m / 330 ft Maximum Digital Resolutions 1920x1200 @60Hz 1920 x 1200 Supported Resolutions 1920 x 1080 1600 x 1200 Wide Screen Supported Yes Audio Specifications 7.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty Information This product is backed by a two year warranty. In addition, StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
