Instruction manual

Instruction Manual

USB 1: press the hotkey below to turn ON/OFF the USB-Port Rule on

both USB Hub ports (2-port only) or USB Hub port 1 (4-port only):

Left <CTRL> + Left <CTRL> + <F7>

USB 2: press the hotkey below to turn ON/OFF the USB-Port Rule on

USB Hub port 2 (4-port only):

Left <CTRL> + Left <CTRL> + <F8>

To change the PC port that the USB hub stays on to the currently

selected PC port, press the following hotkey:

Left <CTRL> + Left <CTRL> + <U>

NOTE: Please make sure that installation of the USB device has been

accomplished before switching to the next computer.

Alternative Hotkey Commands

In addition to the Left <CTRL> + Left <CTRL> hotkeys, there are two

alternative hotkey sequences available.

1. 1. For the following operations, users may press <ScrollLock> twice instead of

pressing left <CTRL> twice.

To select a computer:

(Example: Select the computer at port 1.)

(Example: Select the computer at port 2.)

NOTE: Do not use the keypad at the right of the keyboard.