Dual DVI USB KVM Switch 2 Port Dual DVI USB KVM Switch 4 Port Dual DVI USB KVM Switch SV231DVIDDU SV431DVIDDU Instruction Manual *SV431DVIDDU Shown - Actual product may vary from photo
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Instruction Manual Table of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Hardware Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Installation . . . . . . . . . . .
Instruction Manual Introduction Thank you for purchasing a StarTech.com Dual DVI USB KVM Switch. Providing simple, centralized control of multiple computers from a single display and USB peripheral set (Keyboard and Mouse), SV231DVIDDU/SV431DVIDDU offers versatile dual DVI display capability, as well as support for audio switching and USB device sharing between connected computers - providing rich multimedia capability and cost-effectiveness.
Instruction Manual Hardware Guide Front Panel Rear panel *SV431DVIDDU shown - actual product may vary from photo Installation Please note: Some older computers might require that the USB option be manually enabled in the BIOS, prior to being able to use any USB devices. If you find that USB devices are not functioning, please check the USB option in the BIOS.
Instruction Manual Installing the KVM Switcher Software Please note: The Switcher Software provides an alternative way to operate KVM functions in addition to the original hardware hotkeys. If you are satisfied with the hardware hotkeys, software installation is not necessary. Also note: The Windows switcher software is recommended for systems using Windows 98SE or later. The Mac switcher Software is recommended for use on Mac OS 10.4 (Tiger) and later. 1.
Instruction Manual LOCK, CAPS, ESC, F12 or NUM LOCK keys are available for selection) and you’ll hear a beep for selection confirmation. The new preceding sequence can now be used to execute hotkey commands. Switcher Software Right-click the KVM Switcher icon (shown below) to launch the operation menu, then select whichever PC is available for switching. Once you select a PC channel, it will immediately switch to that PC.
Instruction Manual In Windows: Operation Menu Configuration Dialog Box In MAC OS: Operation Menu Configuration Dialog Box Please note that in addition to the hotkeys as configured in the software interface, you can still use the original “hardware” hotkeys: Hotkey sequence = [ScrLk]* + [ScrLk] * + Command key(s) * User-definable = SCROLL LOCK, CAPS, ESC, F12 or NUM LOCK Using Auto-scan Auto-scan provides users with the ability to designate automated scanning of connected ports, at a pre-defined time
Instruction Manual KVM Switcher configuration Right-click the KVM Switcher icon and select Settings (Windows) or Preferences (Mac) or double-click the icon to bring up the configuration dialog box. Specifying Hotkeys You can specify the command key as needed, by entering it within the configuration utility. For example, you can specify the hotkey for switching to PC 1 as CTRL - ALT - A by typing an A (not case-sensitive) in the editable field.
Instruction Manual Keyboard Hotkey Commands Command Name Hotkey Sequence Description Switches access to the computer connected to the corresponding port number on the KVM. ([x]= a number on the keyboard) Switches which corresponding port number has access to the to the devices connected to the KVM’s USB hub. ([Fx] = Function key: F1=Port 1, F2=Port 2, etc.) Switches which port’s speaker and microphone output is active at the console. ([Fy] = Function key: F5=Port 1, F6=Port 2, etc.
Instruction Manual Specifications Computers supported Front panel push buttons Automatic scan interval Resolution supported 2 (SV231DVIDDU), 4 (SV431DVIDDU) 2 (SV231DVIDDU), 4 (SV431DVIDDU) 10 - 60 seconds (in 5 second intervals) 1920 x 1200 (digital), 2048 x 1536 (analog) Computer peripheral connector Monitor USB Type B x 4 DVI-I x 8 SPEAKER Jack x 4 MIC Jack x 4 Console peripheral connector monitor USB Keyboard x 1 USB Mouse x 1 DVI-I x 2 SPEAKER Jack x 1 MIC Jack x 1 USB Hub (2 ports provided) H x
About StarTech.com StarTech.com is “The Professionals’ Source for Hard-to-Find Computer Parts”. Since 1985, we have been providing IT professionals with the quality products they need to complete their solutions. We offer an unmatched selection of computer parts, cables, server management solutions and A/V products and serve a worldwide market through our locations in the United States, Canada, the United Kingdom and Taiwan. Visit www.startech.
