Instruction manual

Instruction Manual
14
can change a port’s keyboard operating platform configuration as follows:
Bring the KVM focus to the port you want to set.1.
Invoke HSM (see p. 12)2.
Press and release the appropriate Function key (see table). After 3.
completing a setting, you automatically exit HSM.
Please Note: The first time that the Sun system runs from a port, you
must configure its port for the Sun keyboard operating platform before you
turn the system on, or else the Sun system will not start.
List Hotkey Settings
To see a listing of the current hotkey settings, do the following:
Invoke HSM (see p. 12).1.
Press and release the F4 function key.2.
Open a text editor or word processor and use its Paste function to 3.
display the settings.
Function Key Operation
F2
Sets the Mac keyboard operating
platform.
[F3]
Sets the Sun keyboard operating
platform.
[F10]
Auto detects the keyboard operating
platform (for PC compatible systems).
Activates Pass Through keyboard
mode (keystrokes are sent directly to
the computer instead of through the
Mac or Sun emulator).