Instruction manual

19
‘Admin Functions
The
Admin functions allow you to access all of the features you will need
to perform an initial confi guration of the SV3254DX4I.
Network Confi g
DHCP (Dynamic Host Confi guration Protocol)
Automatic network confi guration using DHCP is: Enabled/Disabled. This
feature applies only to the LAN port on the rear panel and is enabled by
default. When enabled, the unit will automatically confi gure itself with
an IP address when a DHCP server is present. When disabled, the LAN
port will use the values assigned to it in the
IP Addresses and Routing
section described below.