Instruction manual

63
Operation Temperature
0°C to 40°C (32°F to 104°F)
Humidity
80% rh, nc
Dimensions
310 x 440 x 44 mm
Weight
2200 grams (4.5 Lbs)
Electrical
100-240 V AC, 0.5 A, IEC320 socket
Frequency
50-60 Hz
Caution
This is an IEC safety Class 1 product. Before using, the ground wire in the
line cord or the rear panel binding post must be connected for safety.
AC Power Source•
This product is intended to operate from an AC power source that will
not apply more than 250 V AC RMS between the supply conductors or
between either supply conductor or ground. A protective ground
connection by way of the grounding conductor in the power cord is
required for safe operation
Use the proper Power Cord•
Use only the power cord and connector appropriate for the voltage and
plug confi guration in your country. Use only power cord in good
condition Refer cord and connector changes to qualifi ed service personnel.
Do Not Remove Cover•
To avoid personal injury, electric shock or death, do not remove the unit
cover.
Do not operate the unit without the cover properly installed. •