Owner's manual

Instruction Manual

3. After you have made your device selection(s), Click Next to perform the upgrade.

• If you enabled Check Firmware Version, the Utility compares the device’s rmware

level with that of the upgrade les. If it nds that the device’s version is equal to,

or higher than the upgrade version, it brings up a dialog box informing you of the

situation and gives you the option to Continue or Cancel.

• If you didn’t enable Check Firmware Version, the Utility installs the upgrade les

without checking whether they are a higher level, or not.

• As the Upgrade proceeds status messages appear in the Status Messages panel, and

the progress toward completion is shown on the Progress bar.