Instruction manual

Instruction Manual

Main Menu

To access the main menu, quickly press F7 twice. You must press the key twice within

one second. If you press it once or too slowly, then the F7 key(s) are sent to the host,

just like any other key. This is the only way to get into the menu system, if the Bribar is

disabled. Here is the main menu for a typical system:

The main menu window may be moved by clicking and dragging on the title bar. It can be

closed by pressing Escape, or by clicking on the red X in the top right corner.

Here is a guide outlining various fields from the Main Menu. Most of the functions

operate immediately. Other functions require a response to a confirmation prompt first

before performing the requested function.

• Identification: Fixed text label that is defined by the user in the Web interface. This

does not affect the operation of the system and is intended to assist with

administration.

• Status: Current status of the attached system and the status of the unit.

• B/W Min/Avg/Max/Auto: Bandwidth control, whereincurrent operation will be

indicated with white highlighting. If you choose Min/Avg/Max then you will override the

default, Auto. As the automatic mode measures actual network performance, you may

see the current mode switch from Min up to Avg or Max. The different modes indicate

more time spent on compression versus more bandwidth. There is no visual difference

between the modes, but there can be a noticeable difference in speed and

smoothness.

• Mouse Resync: Resynchronizes the mouse pointer so that the local and remote

mouse pointers are on top of each other.

• PS/2 Reset: Resets the PS/2 emulation going to the host and to the attached PS/2

devices. This can be used if the mouse stops responding or the PS/2 keyboard isn't