Instruction manual

Instruction Manual
27
Function key <F4>
More functions are available by hitting <F4>. A new screen pops up displaying the
functions described below. Most of them are marked with a triangle indicating there are
options to choose from. Using the <UP> and <DOWN> arrow keys, select the function
and press <ENTER>.
Available options will be shown in the middle of the screen. To select an option, use the
<UP> and <DOWN> arrow keys then press <ENTER> to select the options. You can
press <ESCAPE> to exit at any time.
Auto Scan
In this mode, the KVM automatically switches from one powered computer to the next
sequentially in a fixed interval. During Auto Scan mode, the OSD displays the name of
the selected computer. When Auto Scan detects any keyboard or mouse activity, it
suspends the scanning until activity stops; it then resumes with the next computer in
sequence. To abort Auto Scan mode, press the left <CTRL> twice. Scan Type and Scan
Rate set the scan pattern. Scan Type (<F4>: More\Scan Type) determines if scanned
computers must also be eye mark selected. Scan Rate (<F4>: More\Scan Rate) sets
the display interval when a computer is selected before selecting the next one.
Manual Scan
Scans through powered computers using keyboard control. Scan Type (<F4>: More\Scan
Type) determines if scanned computers must also be eye mark selected. Press the up
arrow key to select the previous computer and the down arrow key to select the next
computer. Press any other key to abort the Manual Scan mode.
Audio Stick
A multimedia module can be LINKed to the back of each KVM for selecting microphone
and stereo speaker signals. There are two options for Audio Stick: On and Off. When
set to On, audio selection follows computer selection. When set to Off, audio selection
stops following computer selection. Off mode is useful if you want to listen to a particular
computer's audio signal while operating other computers. The non-volatile memory stores
the Audio Stick setting. (Note: This is an optional feature requiring a separate device to
be connected to the master switch.)
Scan Type
Ready PC + Eye : In Scan mode, scans through only powered computers that are eye-
marked selected.
Ready PC : In Scan mode, scans through all powered computers. The non-volatile
memory stores the Scan Type setting.
Scan Rate
Sets the duration of a computer displayed in Auto Scan mode. The options are 3
seconds, 8 seconds, 15 seconds and 30 seconds. The Scan Rate setting is stored in
non-volatile memory.
Keyboard Speed
The KVM offers a keyboard typematic setting that overrides the typematic settings in the