Instruction manual

Connecting a Local Keyboard, Mouse, and Monitor
SVxx41HDIE has the capability to connect a local keyboard, mouse, and monitor to the
host computer for maintenance and monitoring, allowing users to physically use the host
computer as though SVxx41HDIE were transparent. If needed, the unit can be run
through a typical KVM switch like any other computer. Using a KVM cable, you can
connect the Server Remote Control’s host computer inputs to the “console” connectors
on a KVM switch allowing you to control more than one computer remotely using a single
Server Remote Control. If you want to use SVxx41HDIE through a KVM switch, consult
the documentation that came with the switch for more details on how to make the
necessary connections.
To connect console devices:
1. Connect a standard PS/2 keyboard to the Local Keyboard port on the front panel of
the SVxx41HDIE.
2. Connect a standard PS/2 mouse to the Local Mouse port on the front panel of the
SVxx41HDIE.
3. Connect an SVGA-compliant monitor to the Video (Out) port on the front panel of
SVxx41HDIE.
4. Power on the host computer.
Instruction Manual
3
*SV841HDIE rear panel shown
1
432
5 8 9
10
11 12 13 14 15 16 17 18
1 DC In
2 Link
3 Serial Port
4 VGA Out
5 R-Port
6* IP Setup button
7** Reset button
8 LAN
9 PS/2 Keyboard
10 PS/2 Mouse
11 - 18 Remote connections
6 7
IP Setup button: Pressing this button (using a
paperclip, etc.) will automatically load the On-
Screen Display.
Reset button: This button serves two purposes:
1)Power reset - reboots power to the SVxx41HDIE
unit
2)Configuration reset - resets values to default,
while configuring