Instruction manual
6
2. From Mouse properties, click on the Motion tab.
3. Make sure that the Pointer speed bar is centered and Acceleration is
set to None.
Windows XP and Windows Server 2003
1. Go to Pointer Options and turn off Enhance Pointer Precision and
ensure that the pointer speed bar is centered.
Linux, Unix and X-Windows
1. Add this command to your xinitrc, xsession or other startup script:
xset m 0/0 0 (For more information, please refer to Troubleshooting)
Conguring the SVxx41HDIE
This IP KVM switch offers four distinct methods for configuring the unit
for your network. Which method will work best will depend on your level
of experience and your specific network configuration.
Web Conguration Using the On-Screen Display
Upon boot-up, including following a reset, The IP KVM switch will
display a window on the local video output, that will appear as follows:
The initial screen will display the IP address assigned by your existing
DHCP server (if present on your network). If no DHCP server is
detected, a factory assigned IP address will be displayed in its place