Instruction manual

(10.0.0.15 by default). Please make note of the assigned IP address,

as you will need to enter it into your web browser to access the Web

Interface.

If static IP addresses are assigned, you will likely need to change the

Net Mask, IP Address and other details, prior to connecting via your

Web browser. If this is the case, connect a local keyboard (USB or

PS/2) and press the Enter key. In order to proceed, you will require an

administrative username and password. By default, the username and

password are admin. You will be given the opportunity to change the

password (recommended) once the conﬁguration is complete.

Alternatively, you may press the Setup button on the front panel, and

you will not be asked to enter the admin password if you just press

Enter.

At the main OSD menu (pictured below), you will be given several

basic setup options. To conﬁgure the IP KVM switch to your required

network settings, use the Network Setup Wizard. To select from the

menus provided, use the arrow keys on your keyboard. At any time,

you can return to the previous menu by pressing the Page Up key.

Web Conguration Using DHCP

This method requires that your network implement DHCP (Dynamic

Host Conﬁguration Protocol), usually on a server or network access

device such as a router that dynamically allows devices to join the

network without pre-conﬁguration. It also assumes that you will have

easy access to your network’s DHCP log, since you will need to know