Instruction manual

15
the IP KVM switch so the new settings take effect immediately.
Ethernet Address (MAC Address)
This is the Ethernet hardware address of this unit’s LAN port. It is set
at the factory and cannot be changed. You may need this number to
configure your DHCP server.
This menu will allow you to add accounts other than admin to the
system. These accounts will not have the authority to change settings,
but can access the Web interface and log into the VNC console.
Selecting Delete permanently removes the user from the system. If
you enter values for a user that does not already exist under Edit User
Details, the system will create that user for you when you click Record
changes. If the user already exists, you will change the password for
that user.
Machine Name
This is a name that is used to uniquely identify this machine. You might
want to create a DNS entry that matches this name. The name is
provided as the Client Name for the DHCP server. It is also shown at
the top of each page in the web browser interface and is the “desktop
name” for VNC clients.
Other identification details
These values are for information purposes. They are visible from the
VNC client and via SNMP (if enabled).
Location
This string is sent as the system.sysLocation value over SNMP. It
should describe the location of this system.
Contact Name
This string is sent as the system.sysContact value over SNMP. It
should describe who to contact regarding this machine. Typically it
includes an email address.