Instruction manual

Site map Menu

This menu provides a hyperlinked directory of each setting available on

the Web conﬁgurator.

Provides the Terms of Use and other information related to the

ﬁrmware and software on the IP KVM switch.

Using the Terminal Interface via Serial Port

The terminal interface you can access via the serial port permits the

conﬁguration of the basic settings of the IP KVM switch. While not

intended to be a substitute for the Web interface, it does allow you to

conﬁgure some of the same functions. The menu list below describes

the options that can be modiﬁed through the terminal interface.

Note that you must use the ‘W’ option to conﬁrm and apply any

changes made before you exit the terminal session.

If you changed the status of the Ethernet Bridging feature, you will

also need to power the IP KVM switch on and off again to enable your

changes.