Instruction manual

• Press <ESCAPE> to exit the OSD and to return to using the

selected computer. The computer name is shown on the screen.

OSD Function Keys

You can use the function keys when the OSD menu is active.

Function key <F1>

Edits the name of a managed computer or a Slave KVM. First, use the

<UP> and <DOWN> arrow keys to highlight a channel then press <F1>

followed by name entry. Your name can be up to 14 characters long.

Valid characters are A to Z, 0 to 9, and the dash character. Lowercase

letters are converted to uppercase. Press <BACKSPACE> to delete a

letter one at a time. Nonvolatile memory stores all name entries until

you change, even if the unit is powered down.

Function key <F2>

Marks a computer to be scanned by switching the eye mark on or off.

First, use the <UP> and <DOWN> arrow keys to highlight the device,

then press <F2> to switch its eye mark on or off. If Scan Type is Ready

PC + Eye (see Function key <F4>), only the powered and eye-marked

computers will be displayed in Scan mode.

Function key <F3>

Locks a device (a computer or a Slave) from unauthorized access. To

lock a device, use the <UP> and <DOWN> arrow keys to highlight it,

then press <F3>. Now, enter up to 4 characters (A to Z, 0 to 9, dash)

followed by <ENTER> as new password. A Security enabled device

is marked with a lock beside its channel number. To permanently

disable the security function from a locked device, highlight it, press

<F3> then enter the password. If you want to access the locked

device temporarily, simply highlight it and press <ENTER>. Enter the

password and you can access the device. The device is automatically

re-locked once you switch to another device. During Scan mode, OSD

skips the security-enabled device.

Function key <F4>

More functions are available by hitting <F4>. A new screen pops up

displaying the functions described below. Most of them are marked with