Instruction manual

35
a triangle indicating there are options to choose from. Using the <UP>
and <DOWN> arrow keys, select the function and press <ENTER>.
Available options will be shown in the middle of the screen. To select an
option, use the <UP> and <DOWN> arrow keys then press <ENTER>
to select the options. You can press <ESCAPE> to exit at any time.
Auto Scan
In this mode, the KVM automatically switches from one powered
computer to the next sequentially in a fixed interval. During Auto Scan
mode, the OSD displays the name of the selected computer. When
Auto Scan detects any keyboard or mouse activity, it suspends the
scanning until activity stops; it then resumes with the next computer
in sequence. To abort Auto Scan mode, press the left <CTRL> twice.
Scan Type and Scan Rate set the scan pattern. Scan Type (<F4>:
More\Scan Type) determines if scanned computers must also be eye
mark selected. Scan Rate (<F4>: More\Scan Rate) sets the display
interval when a computer is selected before selecting the next one.
Manual Scan
Scans through powered computers using keyboard control. Scan Type
(<F4>: More\Scan Type) determines if scanned computers must also
be eye mark selected. Press the up arrow key to select the previous
computer and the down arrow key to select the next computer. Press
any other key to abort the Manual Scan mode.
Scan Type
Ready PC + Eye: In Scan mode, scans through only powered
computers that are eyemarked selected.
Ready PC: In Scan mode, scans through all powered computers. The
non-volatile memory stores the Scan Type setting.
Scan Rate
Sets the duration of a computer displayed in Auto Scan mode. The
options are 3 seconds, 8 seconds, 15 seconds and 30 seconds. The
Scan Rate setting is stored in non-volatile memory.
Keyboard Speed
The KVM offers a keyboard typematic setting that overrides the