Instruction manual

37
(<F4>: More\Hotkey Menu) every time the left <CTRL> key is pressed
twice.
Left Ctrl refers to the <CTRL> key located at the left side of the
keyboard.
1~8/A~H refer to the number keys 1 to 8 at the upper row of the
keyboard (Do not use the keypad at the right of the keyboard) and
character keys A to H (case insensitive).
Selecting a Computer
To select a computer by hot-key command you need to know the
device’s channel address, which is determined by the KVM connection.
For a computer connected to the Master switch, the address is
represented by the PC port number (1~8 or A~H). For example, to
access the PC plugged into port 7 of the Master KVM switch, type:
Left <CTRL> + Left <CTRL> + 7.
For a computer connected to a Slave KVM, you need to know the
channel address of the Slave unit (1~8) and then the channel address
of the device (1~8 or A~H). (Please note that only Master’s PC 1 to
PC 8 ports can be connected to a Slave.) For example, to access the
computer plugged into port C of a Slave KVM Switch that is plugged
into Port 6 of the Master switch, type:
Left <CTRL> + Left <CTRL> + 6 + C
Auto Scan
Auto Scan automatically scans through powered computers at a fixed
interval:
Left <CTRL> + Left <CTRL> + <F1.>
When Auto Scan detects any keyboard or mouse activity, it suspends
the scanning until activity stops; it then resumes with the next computer
in sequence. The length of the Auto Scan interval (Scan Rate) is
adjustable (see Scan Rate on the following page). To abort the Auto
Scan mode, press the left <CTRL> key twice.
Manual Scan
Manual Scan enables you to manually switch back and forth between
powered computers: