Instruction manual

38
Left <CTRL> + Left <CTRL> + <F2>
Press the up or down arrow to select the previous or next computer in
sequence. Press any other key to abort the Manual Scan.
NOTE: The Scan Type setting will determine whether computers must
be eye-marked to be included in the scan. See page 25 for details.
Scan Rate
Scan Rate sets the duration between switching to the next computer in
Auto Scan mode:
Left <CTRL> + Left <CTRL> + <F3>
The unit switches between scan intervals of 3, 8, 15 and 30 seconds.
Keyboard Typematic Rate
You can adjust the keyboard typematic rate (given in characters/sec).
This setting overrides the keyboard typematic rate of your BIOS and
any operating system.
Left <CTRL> + Left <CTRL> + <F4>
The unit switches between rates of 10, 15, 20 and 30 characters/sec.
Changing Your Configuration
After the initial power up, any device (either a KVM or a PC) can be
added or removed from any PC x port on the KVM without having
to power down the Master KVM Switch. Make sure that devices are
turned offer before connecting them to the Master KVM switch. Note:
After changing your configuration, the OSD will automatically update to
reflect the new configuration.
Using the Modem Feature
Background
The modem feature allows the IP KVM switch to act as an Internet
connection server for increased security and flexibility in connecting
with the host computer. Unlike the TCP/IP connection used with the
standard Web configuration and VNC clients, the modem creates a
one-to-one connection between the IP KVM switch and the computer