Instruction manual

39
you are using to manage the host computer that is essentially private,
as it bypasses the public Internet completely. Note: this feature requires
both an external modem (most standard connection protocols are
supported) and a dedicated phone line that can be connected to the
modem for external access. While it is possible to use the modem
feature through some PBX systems, this increases the complexity and
reduces the performance of the connection. For clarity, the instructions
presented here assume that the modem is connected to a typical
POTS (plain old telephone system) line that is not routed through
a phone management system or shared with other devices. If you
wish to use this feature through a PBX system, it may require some
experimentation and additional support from your telecom services
provider, and is not supported by StarTech.com.
Connecting a Modem
The IP KVM switch will work with virtually any Hayes-compatible
modem that recognizes the standard AT command set. Some modem
manufacturers offer “enterprise” grade modem products (at a premium
price) that include technology to improve the stability of connections;
whether this type of product would be beneficial to your application
depends on whether you consider the modem connection to be
mission-critical, the quality of your telecom infrastructure, and your
budget for implementing this solution. The model of modem attached is
essentially transparent to the IP KVM switch.
It is important to note that modems that offer “56K” (or 56,000 bps)
connections often achieve connection speeds that are far lower
than their maximum capabilities. Given the limitations of telecom
infrastructure (many locations have yet to implement fully digital