Instruction manual

4
plug the opposite end of the power cord into the AC/DC adapter, and
plug the power connector into the DC-in port on the rear panel of the
unit.
8. Power on the Host computer.
NOTE: Only integrated KVM cables branded by StarTech.com will work
on all SVxx41HDIE series KVM switches.
IMPORTANT: This KVM switch is convection-cooled. As such, please
ensure the vents on both sides are unobstructed.
Connecting a Local Keyboard, Mouse, and Monitor
SVxx41HDIE has the capability to connect a local keyboard, mouse,
and monitor to the host computer for maintenance and monitoring,
allowing users to physically use the host computer as though
SVxx41HDIE were transparent. If needed, the unit can be run through
a typical KVM switch like any other computer. Using a KVM cable, you
can connect the Server Remote Control’s host computer inputs to the
“console” connectors on a KVM switch allowing you to control more
than one computer remotely using a single Server Remote Control.
If cascading, the SVxx41HDIE can only be the Master. Consult the
Power
connector
DB9 Serial
port
Local Video
(VGA)
Local keyboard
(PS/2)
Local mouse
(PS/2)
LAN port
(RJ45)
R-Port
IP Setup button
Soft Reset button