User manual

Installation
1. Make sure that the converter, computer, monitor, and television are all turned off.
2. Unplug your monitor from your computer. Plug your monitor’s cable into the
converter’s Monitor port.
3. Connect the 15-pin high density extension cable to your computer’s VGA card/
monitor port and the converter’s VGA In port.
4. Depending on your television, use the appropriate cable to connect either the S-Out
(S-Video) port, the C-Out (composite video) port, or the RGB Out (SCART) port to
your television.
5. Make sure that the NTSC/PAL button is set appropriately: IN for NTSC systems,
OUT for PAL video systems.
36
DC 9V
Connects to
power adapter
VGA In
Connects to your computer’s
VGA/monitor port using HD
15-pin VGA extension cable
Monitor
Connects to your
monitor using
monitor cable
C-Out
Connects the composite
video cable to your TV’s
composite port
S-Out
Connects the S-
Video cable to
your TV’s S-
Video port
Rear View
IR Receiver
Aim remote here
Video/RGB
Toggles between
Composite/S-Video (IN)
or RGB/SCART (OUT)
systems
NTSC/PAL
Toggles between
NTSC (IN) or
PAL (OUT)
systems
Power
Turns power to
converter on (IN) or
off (OUT)
-/+
Scrolls through
menu options
and settings
Select
Selects a menu
option or setting
Menu
Toggles the on-
screen menu
display
Power LED
Indicates if
device is
powered (ON)
or not (OFF)
RGB Out
Connects to
SCART port
on television
Front View
Horizontal/Vertical Scaling
The VGA2NTSCPRO allows horizontal and vertical scaling so that an image can be
scaled to meet the visible part of your TV screen. If you are in Zoom mode, vertical
scaling is disabled.
1. Press the Menu button to call up the OSD menu.
2. Use the +/- buttons to scroll to the H/V Scaling icon. Press the Select button to view
the scaling settings.
3. A pair of small arrows will indicate whether you are in Vertical or Horizontal scale
mode. Use the Select button to toggle between Vertical and Horizontal mode.
4. The + button will spread your screen out towards the edges. The - button will
“tighten” or shrink the screen.
5. Once you are happy with your scaling settings, allow the converter to sit idle for a
few seconds. This will save the scaling settings and exit the OSD automatically.
Positioning
The positioning function allows you to move your TV image both vertically and
horizontally.
1. Press the Menu button to call up the OSD menu.
2. Use the +/- buttons to scroll to the Positioning icon. Press the Select button to view
the positioning settings.
3. A pair of small arrows will indicate whether you are in Vertical or Horizontal
positioning mode. Use the Select button to toggle between Vertical and Horizontal
mode.
4. Depending on your mode, the + button will shift the display either up or right. The -
button will shift the display either down or left.
5. Once you are happy with your position settings, allow the converter to sit idle for a
few seconds. This will save the position settings and exit the OSD automatically.
Brightness
There are four brightness levels supported by the VGA2NTSCPRO.
1. Press the Menu button to call up the OSD menu.
2. Use the +/- buttons to scroll to the Brightness icon. Press the Select button to view
the brightness settings.
3. Use the +/- buttons to set the desired brightness level.
4. Once you are happy with your brightness settings, allow the converter to sit idle for
a few seconds. This will save the brightness settings and exit the OSD automatically.