2.5in Tool-less USB 2.0 to IDE SATA Hard Drive Enclosure UNI2510U2V *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the most up-to-date information, please visit: www.startech.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Introduction.............................................................................................1 Packaging Contents.................................................................................................................................. 1 System Requirements............................................................................................................................... 1 Installation..........................................................................
Introduction The StarTech.com hybrid 2.5” USB 2.0 to IDE/SATA Hard Drive Enclosure lets you turn almost any 2.5” laptop hard drive into a portable storage device. Compatible with both IDE or SATA (1.5/3.0Gbps) hard drives, the enclosure offers a cost-effective and convenient choice for a variety of uses including data backups, extra data storage, or simply putting an “outdated” drive to good use. Packaging Contents • UNI2510U2V enclosure • USB 2.
Installation WARNING: Hard drives require careful handling, especially when being transported. If you are not careful with your hard disk, lost data may result. Always handle your hard drive and storage device with caution. Hardware Installation 1. Slide the latch on the bottom of the enclosure to release the top cover. 2. Slide the top cover of the enclosure towards the rear. 3. Remove the top cover by lifting it up off the bottom portion of the enclosure (drive tray).
4. Place the 2.5” hard drive into the drive tray and slide it into the connector firmly. If using an IDE hard drive, the connector is located towards the front of the drive tray, while the SATA drive connectors are located towards the rear of the drive tray. 5. Place the top cover of the enclosure back onto the drive tray. Slide the top cover towards the front of the enclosure and lock into place by sliding the latch on the bottom to the lock position. 6.
Driver Installation Windows 2000/XP/Vista/7, Mac OS 9.2+, and Linux No driver installation is required for these operating systems, as this enclosure is natively supported, so the drivers are already installed. Using the Storage Device Windows 2000/XP/Server 2003/Vista/7/Server 2008 If you are using a brand new hard drive that does not contain any data, then you will first need to prepare the hard drive for use.
The New Partition Wizard will appear. Follow the instructions in the wizard to complete setting up the drive. Once complete, the Disk should show up as “Healthy” with a drive letter assigned (i.e. E:). This drive letter should now appear within My Computer. If you are installing a hard drive that already has data on it, then after plugging it in, the drive should automatically show up with a drive letter assigned within My Computer.
Specifications Bus Interface USB 2.0 Connectors 1 x USB mini-B Chipset ID JMicron JM20337 LEDs 1 x Power/Activity Maximum Data Transfer Rate Compatible Hard Drives USB 2.0: 480Mbps 2.5” EIDE or SATA 1.5/3.0Gbps, 9.5mm height Power Adapter N/A Dimensions 133.0mm x 78.0mm x 19.0mm Weight Compatible Operating Systems Instruction Manual 130g Windows 2000/XP/Server 2003/Vista/7/Server 2008 (32/64-bit), Mac OS 9.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty Information This product is backed by a two year warranty. In addition, StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
