2X2 HDMI® Matrix Switch - 1080p VS222HDQ *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the most up-to-date information, please visit: www.startech.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Product Diagram.....................................................................................1 Introduction.............................................................................................2 Packaging Contents.................................................................................................................................. 2 System Requirements...................................................................................................................
Product Diagram HDMI Input #1 HDMI Input #2 HDMI Output EDID Port Selection Switch EDID Copy Button Power Adapter Port Manual Switch #2 LED Port Selection Indicator Instruction Manual Manual Switch #1 1 Mode Selection Switch
Introduction Packaging Contents • 1x HDMI® Matrix Switch • 1x Universal Power Adapter (US/UK/EU) • 1x Remote control • 1x Mounting kit • 1x Foot pad set • 1x Instruction Manual System Requirements • 2x Video source devices (i.e. computer, Blu-ray Player) • 2x HDMI® enabled display device (i.e.
Hardware Installation 1. Connect two HDMI® cables (not included) from each of the HDMI® Output ports on the switch to each of the HDMI® enabled display devices (i.e. televisions, projectors). 2. Connect an HDMI® cable (not included) from each input device to the HDMI® Input Ports on each video source device (i.e. computers, Blu-ray Players). 3. Turn on each of the display devices, followed by each of the video source devices.
Matrix Mode Matrix mode allows you to output either display to one or both of the video sources. Each display is represented by each of the Manual Switches. 1. Press Manual Switch #1, one time to output Input 1, or two times to output signal 2. 2. Press Manual Switch #2, one time to output Input1, or two times to output signal 2. EDID Copy EDID allows the video source to output the most ideal signal to the video display.
Adjust Video Equalization To optimize the sharpness of both video output ports, the switch features adjustable video Equalization. Follow the steps below to adjust the equalization for each individual output port. 1. Press and hold the EDID copy, and Manual switch #2 buttons for roughly 3 seconds. 2. Release the buttons when the LED Port selection Indicators flash red. Note: These same buttons are also used to factory reset the unit when held for about 9 seconds.
2. Release the buttons when the LED port selection indicators flash green twice. Note: These same buttons are also used to adjust video equalization, as a result the LEDs will flash red before they flash green. Be sure to continue to hold the buttons until the LEDs flash Green twice. 3. The unit has now been restored to factory settings. Remote Control Auto/Priority/Manual Mode Press 1, or 2 to switch between Input source #1, or Input source #2 respectively. Matrix Mode 1.
Specifications Input Ports 2 Ouput Ports 2 AV Input HDMI® AV Output HDMI® Audio Yes Max Distance 10m / 33ft Max Resolution 1080p Wide Screen Supported Yes Instruction Manual 7
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty Information This product is backed by a two year warranty. In addition, StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
