4 Port VGA Video Audio Switch with RS232 control VS410RVGAA *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the most up-to-date information, please visit: www.startech.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Introduction...............................................................................................1 Packaging Contents..............................................................................................................................1 System Requirements..........................................................................................................................1 Front View......................................................................................
Introduction This 4 Port VGA Video and Audio Switch lets you switch between four separate VGA signals, as well as the corresponding audio, for output to a single display or projector. An ideal solution for situations where VGA and audio input ports are scarce, the VGA switch eliminates the hassle of having to swap out connections to your display and audio receiver, while letting you select the video source at the push of a button.
Front View Rear View Remote Control Instruction Manual 2
Installation Hardware Installation 1. Make sure all devices are powered off before beginning the installation. 2. Connect a male/male VGA cable from the “Output” connector on the switch to the VGA connector on the display device (e.g. monitor). 3. Connect a male/male VGA cable from one of the VGA video sources (e.g. computer) to input 1 on the video switch. Repeat for Port 2 ~ 4. 4. Connect the power adapter from an AC electrical outlet to the video switch. Press the power button on the front panel.
How to Use RS232 Serial Control The video switch can be controlled from a remote terminal (e.g. computer) through RS232 serial. A DB9 (9-pin) cable needs to be connected between the video switch and the remote terminal. A regular PC should be connect via straight-through male/female serial cable.
Troubleshooting Symptom Solution Make sure the front panel of the video switch is not blocked or obscured by other objects. Make sure you are pointing the remote control directly at the front panel of the video switch. Remote Control does not work/ stopped working Try switching using the buttons on the front panel of the video switch: If this works correctly, replace the battery (CR-23) in the remote control. If this does not work, the video switch has locked up (see below).
Symptom Solution Turn the display off, then back on. Look for an auto adjust button or setting on the display. Image is not centered properly on the monitor/display Make sure the video source is outputting a standard video resolution that is supported by the video switch and the display. Manually adjust the vertical and/or horizontal positioning from the display’s on screen menu. Try replacing the VGA cables.
Specifications VGA (RGBHV): 0.7Vp-p or 1Vp-p with sync 75 Ohm Video Signal External Connectors (Input) 4 x DE-15 VGA female 4 x 3.5mm Audio mini-jack female 1 x DB9 female 1 x DC Power female External Connectors (Output) 1 x DE-15 VGA female 1 x 3.5mm Audio mini-jack female 1 x Power 4 x Port Selection Indicator LEDs Maximum Video Resolution 1920 x 1200 / 1080p Video Bandwidth 650 MHz (-3dB) Differential Gain 0.05% Differential Phase 0.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty Information This product is backed by a two year warranty. In addition, StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
