4x M.2 SSD to 3.5in SATA HDD Adapter 35S24M2NGFF *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the most up-to-date information, please visit: www.startech.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Product Diagram.....................................................................................1 Front View..................................................................................................................................................... 1 Top View........................................................................................................................................................ 1 Introduction......................................................
Product Diagram Front View Top View 1. M.2 NGFF connectors 2. SSD Mounting holes 3. SSD standoff 4. SATA Power Port 5.
Introduction Packaging Contents • 1x 4x M.2 SSD to 3.5in SATA HDD Adapter (35S24M2NGFF) • 4x SATA data cables • 1x SATA power extension cable • 4x M.2 SSD Installation screws • 4x Bracket Mounting Screws. System Requirements • 4x M.2 NGFF SATA SSD Drive • 1x Computer System with: • 1x Available 3.5in expansion bay • 4x Available SATA ports • 1x Available SATA Power connector on the power supply • 1x Philips Head Size 1 Screw Driver • 1x Philips Head Size 2 Screw Driver M.
2. (Only required if any of the drive installation screws and standoffs requires relocating) Using a Philip’s head screw driver, remove the three board mounting screws pictured below.
3. (Only required if any of the drive installation screws and standoffs requires relocating) Remove the screw holding the SSD standoff you wish to move, from the reverse side using a small Phillip’s head screw driver (not included). 4. (Only required if the drive installation screw and standoff requires relocating) Remove the SSD installation standoff, and reseat it into the drive installation hole that matches your SSD.
Repeat steps 3 and 4 for each standoff that requires relocating. 5. Place the board back on the enclosure, lining up the mounting holes where the screws were earlier removed, and screw the board back into place, using a Philip’s head screw driver. 6. Slide the M.2 connector on the SSD into the M.2 receprical connector on the 35S24M2NGFF.
Note: The connector on your M.2 SSD is keyed so the drive will only fit one way. 7. Press the drive down toward the SSD standoff, and drive the removed screw through the mounting hole on your SSD drive and into the SSD standoff using the a Philips head screw driver. 8. The SSD has now been installed, and is ready for system installation. Repeat steps 6 through 8 for each SSD that requires installation.
System Installation 1. Open your computer case (refer to the computer case user manual for details), and place the 35S24M2NGFF with installed M.2 NGFF SSDs into an available 3.5in bay. 2. Using four of the included computer case screws and a Phillip’s head screw driver. Drive two screws into either side of the 3.5in bay in your computer through the case mounting holes on the side of the 35S24M2NGFF.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty Information This product is backed by a two year warranty. In addition, StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.