User Manual

15
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
3. Using the Phillips Head Screwdriver, tighten the Hook
Mounting Screw, being careful not to over-tighten.
4. Repeat steps 1 to 3 to install the remaining Cable
Management Hooks.
Ground the Rack
1. Insert an M6 Screw through the Grounding Point on the
Grounding Wire and into the Ground Hole located on the
bottom of the Rack. (Figure 10)
2. Run the Grounding Wire under the Rack’s Frame.
3. Connect the Grounding Wire to an Earth Ground
Connection.
Figure 9