User Manual

15
English
RESETTING YOUR VORNADO HEATER
Your Vornado Heater has a multilevel safety shut-off system designed to prevent overheating.
Overheating may occur when the inlets or outlet are blocked. If this happens, the safety shut-off
system cuts power to the heater and you must manually reset the heater.
1. Power heater off, then unplug power cord.
2. Remove any obstructions.
3. Wait 5–10 minutes, allowing heater to cool down.
4. Plug in power cord and place heater in desired position.
5. Power heater On. Your Vornado Heater should
now function normally.
RESET HEATER
Note: If the safety shut-off system repeatedly shuts
off your heater or if it will not reset after following
the above procedure, call Vornado Consumer
Services Department toll-free at 1-800-234-0604.