Owners manual

4POSTRACKHD

45U Heavy Duty 36” Deep 4 Post Open Rack - Flat Pack

Packaging Contents

40 x Hex Bolt•

40 x Nut•

40 x Spring Washer•

40 x Cage Nut (10-32 UNF)•

50 x Cabinet Screw (10-32 UNF)•

4 x Vertical Rails

4 x Top/Bottom Rails

4 x Join Brackets

Assembly

Lay the vertical rails face down. At one end, place a top/bottom rail and insert three hex head bolts and fasten with three 1.

head nuts.

Install a second top/bottom rail at the other end of the vertical rail.2.

Repeat Step 2 to attach the second vertical rail. Repeat Steps 1 to 3 to assemble the other side.3.

Tools Required

2 x 14mm wrench•

WARNING! Please ensure that the rack is full assembled with all included parts and

fasteners before attempting to mount any rack equipment. Failure to install and fully

tighten any hardware could severely compromise the structural integrity of the rack. If any

hardware is missing, please contact StarTech.com customer service immediately.

PAGE 1
45U Heavy Duty 36” Deep 4 Post Open Rack - Flat Pack 4POSTRACKHD Packaging Contents Tools Required • 40 x Hex Bolt • 40 x Nut • 40 x Spring Washer • 40 x Cage Nut (10-32 UNF) • 50 x Cabinet Screw (10-32 UNF) • 2 x 14mm wrench 4 x Vertical Rails WARNING! Please ensure that the rack is full assembled with all included parts and fasteners before attempting to mount any rack equipment. Failure to install and fully tighten any hardware could severely compromise the structural integrity of the rack.
PAGE 2
4. Connect the vertical rails together using the join brackets. Insert the hooks into the slots on the vertical rails. Insert two hex head bolts and fasten with two head nuts for each side. 5. Securely attach the join brackets at the top and bottom ends on a single side first. Then reverse the rack and repeat the same steps on the other side. 6. Finished assembly of rack.
PAGE 3
7. Stand up the frame and check that all the bolts are tightened. Specifications Description 45U Heavy Duty 36in Deep 4 Post Open Server Equipment Rack Colour Black Materials SPCC (2.0mm) Weight Capacity 800 kg Dimensions 609.0 mm x 914.0 mm x 2135.0 mm Net Weight 55 kg Standards EIA-310D Certifications UL/CE FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.