User Manual

10
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
4. Insert two M8 Bolts through two M8 Washers and into the
holes in the Base Bracket, Vertical Rails, and the Center
Section Assembly. Repeat for the other side of the Base
Bracket. (Figure 4)
5. Tighten the M8 Bolts using the 13 mm Wrench.
6. Repeat steps 3 to 5 to install the second Base Bracket.
7. Lift the current assembly of parts upright.
Figure 4