User Manual

Instruction manual

4. Stick two of the pads to the other half of the mounting bracket. If necessary,

attach additional pads to accommodate the size or shape of the equipment that

you’re mounting. (gure 23)

gure 23

Mounting bracket

Pad

Assembly hole

5. Place the half of the mounting bracket with the shorter platform over the VESA

monitor mount so that the holes on the bracket line up with the holes on the

mount.

6. Insert the four M4x12 mm screws through the mounting bracket and the VESA

monitor mount.

7. Slide the washers over the ends of the M4x12 mm screws.

8. Use a wrench and attach the M4 nuts onto the ends of the screws and tighten the

nuts in place.

9. If necessary, use a screwdriver and/or wrench to tighten the screws. (gure 24)

gure 24

M4 nut

Washer

M4x12 mm screw

Mounting bracket