User Manual

Instruction manual

10. Place the adjustable strap in the recessed area on the half of the mounting

bracket with the extended platform, and line up the mounting holes on the

mounting bracket with the mounting holes on the back of your monitor.

11. Insert the M4x12 mm screws through the mounting bracket and into the monitor.

12. Insert the bolts on the mounting bracket into the slots on the mounting bracket

and monitor assembly.

13. Thread the knobs onto the bolts on the bottom of the mounting bracket. Do not

tighten the knobs at this point in the assembly. (gure 25)

gure 25

Mounting bracket

Knob

14. Carefully slide your equipment onto the mounting bracket. (gure 26)

gure 26

Mounting bracket

Equipment

Note: The monitor bracket is pictured without the monitor attached for illustration purposes only.