User Manual
gure 10
Instruction manual
8
Route the cables
The ARMBARDUO comes with cable-management clips that you can use to direct the
monitor cables along the crossbar and down the pole so that they are out of your way.
Make sure that the cables that you’re routing are unplugged before you complete the
following steps.
1. Attach the two cable-management clips (crossbar) (14) from the crossbar (7)
(gure 10). If necessary, you can move the cable-management clips right or left
along the crossbar.
Cable-management clips
2. Run the cable coming from each of the monitors through the corresponding cable-
management clips (crossbar) (gure 11).
gure 11