User Manual

Instruction manual
4
Attach the crossbar
1. Slide the height-adjustment ring (6) down the pole (1) to the height that you want
the monitors to be at.
2. Press the lever on the height-adjustment ring to tighten it and prevent it from
sliding down the pole.
3. Slide the crossbar (7) down the pole so that it sits on the height-adjustment ring.
4. Push the pole cap (5) down onto the top of the pole (gure 2).
5. Use the M3 Allen key (12) and turn the screw in the crossbar clockwise to tighten it
and prevent the crossbar from moving (gure 3).
gure 2
Pole
Height-adjustment ring
Crossbar
Pole cap
gure 3
Crossbar
Height-adjustment ring
M3 Allen key