User Manual

Instruction manual
7
Attach a crossbar
1. Use the 3 mm hex key to loosen the screw in the side of the collar on the lower
pole, and raise or lower the collar on the pole.
2. When the collar is at the desired height, use the 3 mm hex key to tighten the screw
in the side of the collar. (gure 3)
gure 3
3 mm hex key
Lower pole
Collar
3. Slide one of the crossbars down the pole so that it sits against the collar. (gure 4)
gure 4
Collar
Lower pole
Crossbar