User Manual

Instruction manual
9
4. Use the 3 mm hex key to tighten the two screws in the side of the pole connector.
(gure 7)
gure 7
3 mm hex key
Pole connector
Attach the second crossbar
1. Use the 3 mm hex key to loosen the screw in the side of the collar on the upper
pole, and raise or lower the collar on the pole.
2. When the collar is at the desired height, use the 3 mm hex key to tighten the screw
in the side of the collar. (gure 8)
gure 8
3 mm hex key
Collar