Manualshelf

User Manual

ManualsBrandsStartech ManualsAccessoriesStarTech.com Quad Monitor Stand Articulating - Supports Monitors 13" to 27" - Adjustable VESA Four Monitor Stand for 4 Screen Setup - Steel - Black - stand - for 4 monitors - black
11121314151617181920
Instruction manual
14
2. While someone holds the monitor in place, insert the M4x12 mm screws or M5x12
mm screws through the washers, the mounting holes in the VESA monitor mount,
and into the back of the monitor. (gure 15)
3. Use a Phillips screwdriver to tighten the screws.
Caution! If the crossbar starts to slip down the pole when you add the weight of
the monitor, remove the monitor and use the 5 mm hex key to tighten the screw in
the back of the crossbar. When the screw is tightened, repeat step 2 to reattach the
monitor.
Warning! Do not over-tighten the screws. If you encounter resistance while you’re
tightening the screws, stop tightening. Failure to do so could result in damage to the
monitor.
4. Repeat steps 1 to 3 to attach the other three monitors to the VESA monitor mounts
on the crossbars.
gure 15
M4x12 mm screw
or
M5x12 mm screw
Washer
VESA monitor mount
Crossbar