User Manual

Instruction manual
16
Tipping hazard warning
Warning! The most stable conguration of the ARMBARQUAD is in the “at” position,
with each set of monitors positioned in a straight line. Depending upon the forward
and rear positioning of the monitors, ARMBARQUAD can become unstable. If you
adjust the position of the monitors, you do so at your own risk, and you should exercise
caution and test the stability of the ARMBARQUAD before you use it in the adjusted
conguration. (gure 18)
gure 18
Adjust the vertical position of the monitors
To make adjustments to the position of the monitors, use the 5 mm hex key to
adjust the screw in the top of the VESA monitor mounts.
gure 19
360°
360°
5 mm hex key
Screw