User Manual

Instruction manual
8
Attach the VESA monitor mounts
Warning! Make sure that the weight of the monitors that you are using does not
exceed the weight capacity of this product. If you exceed the weight capacity, you
might experience personal injury or damage to the product.
This product can support up to 17.6 lb. (8 kg) per monitor.
1. Position one of the VESA monitor mounts over the mounting holes on the back of
one of the monitors.
Note: Make sure that you position the VESA monitor mount so that the adjustment
screw on the mount is facing towards the top of the monitor.
2. Position four of the washers over the holes on the VESA monitor mount.
3. Insert four of the M4x14 mm screws or the M5x14 mm screws through the washers,
the VESA monitor mount, and into the monitor. (gure 4)
4. Use a Phillips type screwdriver to tighten the screws.
5. Repeat steps 1 to 4 to attach the second VESA monitor mount to the third monitor.
gure 4
Top of monitor
VESA monitor mount
M4x14 mm screw
OR
M5x14 mm screw
Washer