User Manual

Instruction manual
11
Attach the crossbar and monitor arms
Warning! Attaching the crossbar and monitor arms is a two-person job. Do not
attempt to complete this task by yourself.
1. Use the 3 mm hex key to loosen the screw in the collar on the pole.
2. Slide the collar to the height that you want the monitors to sit at, and use the 3 mm
hex key to tighten the screw in the collar. (gure 8)
gure 8
Pole
Collar
3 mm hex key
3. Carefully slide the crossbar over the end of the pole so that it’s sitting against the
collar. (gure 9)
gure 9
Crossbar
Pole