Cubicle Monitor Hanger with Height Adjustment | Black Actual product may vary from photos User Manual SKU#: ARMCBCLB For the latest information and specifications visit www.startech.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question.
Warning Statements • Make sure that you assemble this product according to the instructions. • Do not exceed the weight capacity of this product. Overloading this product might result in injury or property damage. This product can support the following weight: 17.6 lb. (8 kg). • This product is intended for indoor use only and should not be used outdoors. • The mount is designed to be installed onto a cubicle wall.
potrebbe causare danni o lesioni. Il prodotto è in grado di supportare i seguenti pesi: 8 kg. • Il prodotto è destinato all’uso in ambienti interni. Se ne sconsiglia l’impiego in ambienti esterni. Mensagens de aviso • Certifique-se de que monta este produto de acordo com as instruções. • Não exceda a capacidade de peso deste produto. Sobrecarregar este produto pode resultar em ferimentos ou danos de propriedade. Este produto pode suportar o seguinte peso: 8 kg.
Table of Contents Warning Statements................................................................................................................................. 2 Product Diagram.....................................................................................5 Product Dimensions.................................................................................................................................. 6 Product Information......................................................................
Product Diagram 2 3 1 4 5 1 Cubicle Mount 2 Adjustment Screws (x 2) 3 Height Adjustment Handle 4 VESA Mount 5 Height-Adjustment Holes To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Product Dimensions To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
No Bracket Extension To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Full Bracket Extension To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Product Information Package Contents Cubicle Mount EVA Foam Pad Qty: One Qty: One Hex Key M4x12 mm Screws Qty: One Qty: Four To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
M4x16 mm Screws M5x12 mm Screws Qty: Four Qty: Four M5x16 mm Screws Washers Qty: Four Qty: Four Spacers Qty: Four To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Product Specifications 75 x 75 100 x 100 VESA LB kg 17.6 lb. (8 kg) Weight Max. 32 “ Screen Size 360o Rotation To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
- 100 to + 100 Tilt - 100 to + 100 Swivel Requirements • • Phillips Head Screwdriver Pliers To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Installation The Cubicle Mount is design to hang over the top of a cubicle wall. Hanging the Cubicle Mount 1. Using the Hex Key (included), loosen the two Adjustment Screws at the top of the Cubicle Mount, so that the Cubicle Mount can fit overtop of the width of a Cubicle Wall. 2. Cut off pieces of EVA Padding from the EVA Foam Pad.
3. Slide the Cubicle Mount overtop of a Cubicle Wall, with the VESA Mount on the side you want to mount a monitor on. 4. When the Cubicle Mount is in the desired position on the Cubicle Wall, use the Hex Key (included) to re-tighten the two Adjustment Screws on the top of the Cubicle Mount. Tightening the Adjustment Screws To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Attaching a Monitor 1. Using a Phillips Head Screwdriver (sold separately) unscrew the VESA Mount Screw on the side of the VESA Mount. 2. Pull the VESA Mount up to disengage the VESA Mount from the Holder on the Cubicle Mount. Removing the VESA Mount To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Flat Mount 1. Align the VESA Mount with the Mounting Holes on the back of the Monitor. 2. When the VESA Mount is properly aligned, align the four Washers with the Holes on the VESA Mount. 3. Select the most suitable mounting hardware for mounting the Monitor. 4. Insert four of the Mounting Screws (Included) through the Washers and VESA Mount and into the Mounting Holes on the back of the Monitor. Flat Mounting the VESA Mount 5.
Recessed Mount 1. Align the four Spacers with the Mounting Holes on the back of the Monitor. 1. Align the VESA Mount with the Spacers and Mounting Holes on the back of the Monitor. 2. When the VESA Mount is properly aligned, Align the four Washers with the Holes on the VESA Mount. 3. Select the most suitable mounting hardware for mounting the Monitor. The longer screws are intended for use with the Spacers. 4.
7. Tighten the VESA Mount Screw to secure the Monitor in place. Routing Cables • Monitor Cables can be routed down the Cubicle Mount and out through the Cable Management Clip located at the bottom of the Cubicle Mount. Routing the Cables To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Tightening the VESA Mount If monitor adjustment are not holding in place the Hex Screw on the back of the VESA Monitor Mount will need to be tightened. 1. While supporting the weight of the Monitor, remove the VESA Monitor Mount from the Holder and remove the Monitor from the VESA Monitor Mount (see Attaching a Monitor). 2.
Adjusting the Cubicle Mount 3. Slowly release the Height Adjustment Handle allowing the Latch Hook to catch, securing the Monitor in place. Please ensure that the Latch Hook is properly engaged before releasing the Monitor. To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Warranty Information This product is backed by a five-year warranty. For further information on product warranty terms and conditions, please refer to www.startech.com/warranty. Limitation of Liability In no event shall the liability of StarTech.com Ltd. and StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
