User Manual
Table Of Contents
- Warning Statements
- Product Diagram
- Product Dimensions
- Product Information
- Package Contents
- Product Specifications
- Requirements
- Mounting the Monitor Arm Using the C-Clamp
- Using the Grommet Mount
- Attaching the Monitors (Flush)
- Attaching the Monitors (Recessed)
- Mounting the Monitors
- Adjusting the Monitors
- Tilt Adjustment
- Micro Adjustments
- Routing the Cables
15
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
10. Using the 3 mm Hex Key, loosen the Adjustment Screw on
the Collar.
11. Position the Collar at the height you want the Monitors to
sit.
12. Using the 3 mm Hex Key, tighten the Adjustment Screw on
the side of the Collar, securing the Collar to the Pole.
13. Clip the Arm Assembly Clips (x 4) into place along the
Swivel Arm Assembly.
Installing the Arm Assembly Clips
14. Slide the Swivel Arm Assembly over-top of the Pole, until
the Swivel Arm Assembly comes in contact with the Collar.