User Manual
Table Of Contents
- Warning Statements
- Product Diagram
- Product Dimensions
- Product Information
- Package Contents
- Product Specifications
- Requirements
- Mounting the Monitor Arm Using the C-Clamp
- Using the Grommet Mount
- Attaching the Monitors (Flush)
- Attaching the Monitors (Recessed)
- Mounting the Monitors
- Adjusting the Monitors
- Tilt Adjustment
- Micro Adjustments
- Routing the Cables
18
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
2. Slide the Cable Management Clips onto of the pole.
- or -
Clip the Cable Management Clip onto the Pole.
Installing Cable Management Clip
3. Align the three Screw Holes on the top of the C-Clamp with
the three Screw Holes on the bottom of the Pole.
4. Using a Phillips Head Screw Driver, remove the small screw
attached to the Knob onto the C-Clamp.
Removing the Knob
5. Remove the backing from the Rubber Pads (x 5).