User Manual
Table Of Contents
- Warning Statements
- Product Diagram
- Product Dimensions
- Product Information
- Package Contents
- Product Specifications
- Requirements
- Mounting the Monitor Arm Using the C-Clamp
- Using the Grommet Mount
- Attaching the Monitors (Flush)
- Attaching the Monitors (Recessed)
- Mounting the Monitors
- Adjusting the Monitors
- Tilt Adjustment
- Micro Adjustments
- Routing the Cables
19
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
6. Apply the adhesive side of the Rubber Pads to the side of
the Grommet Base Plate without the protrusion.
7. Align the Protrusion on the Grommet Base Plate with the
Notch on the bottom of the Pole.
Aligning the Grommet Base Plate
8. Insert the Protrusion on the Grommet Base Plate into the
Notch on the bottom of the Pole.
9. While holding the Grommet Base Plate against the bottom
of the Pole, align the center hole on the Grommet Base
Plate with the Grommet Hole in the Mounting Surface.
10. On the under side of the Mounting Surface, align the
Grommet Plate with the Grommet Hole.
11. Insert the Knob through the Grommet Plate and Grommet
Hole and into the Grommet Base Plate and Pole.