Dual Monitor Arm with Full-Motion Articulation - Stackable ARMDUAL30 *actual product may vary from photos FR: Guide de l’utilisateur - fr.startech.com DE: Bedienungsanleitung - de.startech.com ES: Guía del usuario - es.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com IT: Guida per l’uso - it.startech.com For the latest information, technical specifications, and support for this product, please visit www.startech.com/ARMDUAL30.
Table of Contents Introduction.............................................................................................1 Packaging contents................................................................................................................................... 1 Product diagrams....................................................................................2 Technical specifications............................................................................................................
Introduction The ARMDUAL30 is a full-articulation monitor mount that lets you mount and display your monitors in the setup that works best for you. The snap-and-release assembly makes the ARMDUAL30 easy to assemble and customize. Customizing options include assembling the mounting arms vertically or horizontally; using the dual mount attachment or attaching the mounting arms directly to the pole; changing the placement of the spring and swivel arms, and more. Packaging contents 1. 2.
Product diagrams VESA monitor mount VESA monitor mount Spring arm Swivel arm Swivel arm Dual mount Cable manager 2-in-1 desk or grommet mount (grommet pictured) Instruction manual 2 Spring arm
Technical specifications Type of movement Measurement Lift 160 mm Angle 1000 Pivot 3600 Swivel 3600 Pan 2400 Tilt 1050 Extension 590 mm Vertical 270 mm Weight load Do not exceed 20 kg Instruction manual 3
There are four main tasks that you need to complete when you assemble the ARMDUAL30: Attach the ARMDUAL30 to a desk or table, attach the monitor arms, attach the monitors, and route the monitor cables. Attach the ARMDUAL30 to a desk or table By default, the ARMDUAL30 comes with the desk mount preassembled. Convert the desk mount to a grommet mount 1. Turn the 2-in-1 desk mount (1) over so that the pole faces downwards.
Convert the grommet mount to a desk mount By default, the ARMDUAL30 comes with the desk mount preassembled. If you assemble the grommet mount and want to switch back to a desk mount, you will need to use the screws and hardware that you removed when you converted the ARMDUAL30 to a grommet mount. 1. Use a Phillips screwdriver (not included) to insert four M6x12 mm screws into the two halves of the desk mount (1) (figure 4).
5. Turn the 2-in-1 desk mount over and use one of the M3 Allen keys (3) to insert four M5x14 mm hex screws through the desk mount and into the base of the mount (figure 7). figure 7 M3 Allen key M5x14 mm hex screw (x4) Use the grommet mount to attach the ARMDUAL30 1. Remove the plastic from the base cushion (4) and attach it to the bottom of the base mount. Make sure that you line up the hole on the base mount with the corresponding hole on the base cushion. 2.
Use the 2-in-1 desk mount to attach the ARMDUAL30 1. Remove the plastic from the base cushion (4) and attach it to the bottom of the base mount. Make sure that you line up the hole on the base mount with the corresponding hole on the base cushion. 2. Turn the thumbscrew on the desk mount (1) counterclockwise until you reach the thickness of the desk or table (figure 10). Note: The desk mount can accommodate a desk or table between 20 and 110 mm thick. figure 10 Thumbscrew 3.
Attach the monitor arms Set up the monitors side-by-side Note: If you want to position your monitors side by side at exactly the same height, use the dual mount to attach the monitor arms. Using the dual mount adds approximately two inches of distance between the two monitors. 1. To loosen the tension of the cable manager (9), pull out the lever and turn the knob counterclockwise (figure 12). figure 12 Cable manager 2.
6. If necessary, use the M3 Allen key (3) with the dual mount to increase or decrease the swing tension of the swivel arms (figure 15). Tip: Place the M3 Allen key into the holder on the cable manager so that you don’t lose it when it’s not in use (figure 16). figure 16 figure 15 M3 Allen key Cable manager Dual mount M3 Allen key 7. Snap the spring arms (5) onto the swivel arms (figure 17).
figure 18 Cable manager 2. Slide one of the cable managers over the pole and move the cable manager to the height that you want the monitor arms to be at. 3. Slide one of the swivel arms (6) down the pole until it’s sitting on the cable manager (figure 19). figure 19 Swivel arm Cable manager 4. Slide the second cable manager down the pole so that it’s sitting on the first swivel arm. 5. Slide the second swivel arm down the pole so that it’s sitting on the second cable manager. 6.
figure 22 figure 21 M3 Allen key Cable manager M3 Allen key Use the dual mount to attach the monitor arms You can customize the ARMDUAL30 by changing the order in which you assemble the monitor arms or by using just the swivel arms or the spring arms. You can also assemble one set of monitor arms in one configuration and assemble the other set in a different configuration. 1. To loosen the tension of the cable manager (9), pull out the lever and turn the knob counterclockwise (figure 23).
5. Snap the spring arms (5) onto the dual mount (figure 25). figure 25 Spring arm Dual mount 6. If necessary, use the M3 Allen key (3) with the dual mount to increase or decrease the swing tension (figure 26). Tip: Place the M3 Allen key into the holder on the cable manager so that you don’t lose it when it’s not in use (figure 27). figure 26 figure 27 M3 Allen key Cable manager Dual mount M3 Allen key 7. Snap the swivel arms (6) onto the spring arms (figure 28).
Attach the monitors If you’re positioning the monitors side-by-side, the maximum recommended size of monitors that you can use is 30 inches. Warning! Each of the spring arms has factory-set tension to support monitors that weigh between 2.5 and 4.5 kg. If you attach a monitor that weighs less than 2.5 kg or more than 4.5 kg, you will need to adjust the monitor mount. 1. If you attach a monitor that weighs less than 2.5 kg or more than 4.
3. Repeat step 2 for any additional monitors that you’re attaching. 4. If the monitor doesn’t stay in place or the movement is stiff, do one of the following: • To increase the tension, use the M3 Allen key (3) to turn the screws in the monitor mount clockwise (figure 31). • To decrease the tension, use the M3 Allen key to turn the screws in the monitor mount counterclockwise (figure 31).
Disassemble the ARMDUAL30 1. Remove the thumbscrews (8) from the back of the monitors and the monitor mounts (7). Warning! Make sure that you lift the mounting arm up to its highest position when you remove the monitor. When you remove the weight of the monitor, the arm could bounce upward and cause injury. 2. To remove the monitor mounts and mounting arms, slide the textured button away from you on each of the mounts and arms and lift them up (figure 33). 3.
Technical support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty information This product is backed by a two-year warranty. StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.