User Manual

Figure 7

Warning! Do not over-tighten the Screws. If you encounter

resistance while you’re tightening the Screws, stop

tightening. Failure to do so could result in damage to the

Monitor.

6. Complete steps 1 to 4 to add a VESA Mount to a second

Monitor.

Attach the VESA Mounts to the Swivel Arms

Note: A second person may be required to complete the

following steps.

1. Lift the Monitor that will be positioned on the left-hand side

and position it over the Swivel Arm Receptacle.

2. Insert the cylindrical portion of the VESA Mount into the

Swivel Arm Receptacle on the left-hand side until you hear

the VESA Mount click into place. (Figure 7)

3. Repeat steps 1-2 for the Monitor on the right-hand side.