User Manual
16
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Adjusting the Monitors
Warning! The most stable conguration of ARMDUALSS is
the “at” position, with both of the Swivel Arms positioned
in a straight line. ARMDUALSS can become unstable depend-
ing on how you position the Monitors. If you adjust the posi-
tion of the Monitors, you should exercise caution and test
the stability of ARMDUALSS before you use it in the adjusted
conguration.
Tilt Adjustment
The Monitors can be tilted to accommodate dierent viewing
angles (40 degrees downward or 90 degrees upward).
1. Loosen the Hex Screw on the side of each VESA Mount by
inserting the 6 mm Hex Key and turning it counterclockwise
until the Monitor can easily be reoriented.
Note: It is not necessary to fully loosen the Hex Screws to
adjust the tilt of the Monitors.
2. Place both of your hands on either side of the Monitor and
apply light pressure either forwards or backwards.
3. When the Monitor is in the desired position, tighten the Hex
Screw on each VESA Mount by inserting the 6 mm Hex Key
and turning it clockwise until the Hex Screw is hand tight.
(Figure 8)
Note: A second person may be required to hold the Monitors
as you tighten the Hex Screws.