Horizontal Dual-Monitor Stand - Silver Actual product may vary from photos User Manual SKU#: ARMDUOSS For the latest information and specifications visit www.startech.
Compliance Statements Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.
Safety Statements • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines. • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards. Mesures de Sécurité • L’installation et/ou le montage du produit doit être réalisé par un professionnel certifié et dans le respect des normes locales et du code de construction local.
Warning Statements • Make sure to assemble this product according to the instructions. Failure to do so might result in personal injury or property damage. • Make sure that the weight of the monitors doesn’t exceed the weight capacity of this product. If you exceed the weight capacity, you might experience personal injury or damage to the equipment. This product can support the following weight: 17.6 lb. (8 kg) per monitor mount. • Never operate this product if parts are missing or damaged.
Dichiarazioni di Avvertenza • Assemblare il prodotto rispettando le istruzioni. Il mancato rispetto delle istruzioni potrebbe causare danni a persone o proprietà. • Verificare che il peso del monitor non superi la capacità di supporto del prodotto. In caso di superamento della capacità di supporto potrebbero verificarsi danni a persone o apparecchiature. Il prodotto è in grado di supportare i seguenti pesi: 8 kg per monitor. • Non utilizzare il prodotto in presenza di parti mancanti o danneggiate.
注意 • 必ず取扱説明書に従って本製品の組み立てを行って下さい。取り扱いを誤 った場合に、傷害を負う恐れや物的損害が発生する恐れがあります。 • 取り付けるモニターの重量が、本製品で定められた最大積載重量を超えな いようにして下さい。最大積載重量をオーバーした場合、傷害を負う恐れや モニターや本製品に損害が発生する恐れがあります。本製品は、モニター1 台あたり10kgまで支持できます。 • 本製品で使用している部品の一部が紛失していたり損傷している状態で使 用するのは絶対に止めて下さい。 To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Table of Contents Compliance Statements.........................................................................i Safety Statements...................................................................................ii Warning Statements...............................................................................iii Product Diagram.....................................................................................1 Front View..................................................................................
Product Diagram Front View 1 2 2 1 3 4 1 VESA Monitor Mount 2 Cable-Management Clip (Crossbar) 3 Pole 4 Baseplate To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Rear View 5 6 7 8 5 Pole Cap 6 Crossbar 7 Height-Adjustment Ring 8 Cable-Management Clip (Pole) To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Side View 9 10 11 12 9 Height-Adjustment Screw 10 End Cap 11 Plate 12 Thumbscrew To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Product Information Package Contents 2 1 Pole Baseplate Qty: One Qty: One 3 M6x15 mm Screws Qty: Three 6 5 Pole Cap Qty: One 9 HeightAdjustment Ring Crossbar Qty: One Qty: One 10 M4x12 mm Screws M4x30 mm Screws Qty: Eight Qty: Eight 13 7 11 M4 Hex Key M5 Hex Key Qty: One Qty: One Qty: One 8 VESA Monitor Mounts Qty: Two 12 M3 Hex key Qty: Eight Qty: One CableManagement Clips (Crossbar) Qty: Two 4 CableManagement Clip (Pole) Plastic Spacers 15 14 4 16 User Manual Qty:
Assembly Warning! Make sure that all of the hardware is assembled securely and checked for stability before you load the monitors. Assemble the Base 1. Insert the M6x15 mm Screws through the three holes in the Baseplate and into the Pole (Figure 1). 2. Use the M4 Hex Key and turn the M6x15 mm Screws clockwise to tighten. Figure 1 Pole Baseplate M6x15 mm Screw M4 Hex Key To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Attach the Crossbar 1. Slide the Height-Adjustment Ring down the Pole to the desired height. Note: The Height-Adjustment Ring uses a ratchet-style fastening system. Pull the Lever outward to adjust the position of the Lever without affecting the tension on the screw. This feature will help with tightening the Ring when it is in contact with the Crossbar. 2. Rotate the Lever on the Height-Adjustment Ring clockwise to tighten it and prevent it from sliding down the Pole.
Figure 3 Crossbar Set Screw Height-Adjustment Ring M3 Hex Key To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Attach the Monitors Warning! ARMDUOSS is designed to display two Monitors between 15 and 24 inches in size. The maximum weight capacity of ARMDUOSS is a total of 35.2 lb. (16 kg), with each Monitor Mount able to hold 17.6 lb. (8 kg). Note: To prevent scratching during the installation process, you should handle the surface of the Monitors with care. Figure 4 Plate Pole Thumbscrew 1. To loosen the Plates on the Crossbar , turn the Thumbscrews at the bottom of the Plates counterclockwise.
HeightAdjustment Screw Figure 6 HeightAdjustment Screw 5. Do one of the following: • To install Monitors that have a flush installation surface, insert four of the M4x12 mm Screws through the VESA Monitor Mount and into the Mounting Holes on the back of the Monitor. Use a Phillips Head Screwdriver to tighten the Screws (Figure 7).
Figure 8 Figure 7 VESA Monitor Mount M4x12 mm Screws VESA Monitor Mount M4x30 mm Screws Plastic Spacers Adjusting the Monitors Tilt Adjustment The Monitors can be tilted to accommodate different viewing angles (15 degrees downward or upward). • Place both of your hands on either side of the Monitor and apply light pressure either downward or upward. The Monitor will tilt to a maximum of 15 degrees in either direction (Figure 9).
Swivel Adjustment The Monitors can be adjusted on a 360-degree swivel. • Place both of your hands on either side of the Monitor and apply light pressure either left or right. The Monitor will swivel 360 degrees. Adjusting the VESA Mount If the Monitors are not staying in place, the Hex Screw on the back of the VESA Monitor Mount will need to be tightened. This Hex Screw may also need to be loosened in order to readjust the position of the Monitors. 1.
Figure 10 Route the Cables ARMDUOSS comes with Cable-Management Clips that you can use to direct the Monitor Cables along the Crossbar and down the Pole so that they are out of your way. Note: Make sure that the Cables you are routing are unplugged before you complete the following steps. 1. Attach the two Cable-Management Clips (Crossbar) to the Crossbar (Figure 11). Each Clip snaps into place. If necessary, you can move the CableManagement Clips (Crossbar) right or left along the Crossbar. 2.
Figure 11 CableManagement Clips (Crossbar) Figure 12 3. Hold the Cables against the Pole and snap the Cable-Management Clip (Pole) over the Cables and onto the Pole. You can place the Cable-Management Clip (Pole) on the front or back of the Pole, depending on your preference or setup. To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Warranty Information This product is backed by a five-year warranty. For further information on product warranty terms and conditions, please refer to www.startech.com/warranty. Limitation of Liability In no event shall the liability of StarTech.com Ltd. and StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
