Manualshelf

User's Manual

ManualsBrandsStartech ManualsAccessoriesStarTech.com Vertical Dual Monitor Stand, Ergonomic Desktop Stacked Two Monitor Stand up to 27 inch VESA Mount Displays, Free Standing Universal Monitor Mount, Height Adjustable, Silver Double Monitor Holder - stand - for 2 monitors - black, silver
20212223242526272829
Table Of Contents
16
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
1. With Two People: Lift the Monitor Mount Assembly into an
upright position.
2. Position the Monitor Mount Assembly on the desired
location of your Desk.
3. Connect the Video Cables from each Monitor into your
Computer, Laptop, or Docking Station.
4. Connect the Power Cables from each Monitor to an AC
Electrical Outlet.
Operation
Adjust the Monitor Height
Warning! Adjusting the Monitor height is a two-person job.
Do not attempt to complete this task by yourself.
1. Person one: hold the Monitor in place.
2. Person two: Loosen the two Flat-Head Screws on each of
the Collars using the 3 mm Hex Key with Screwdriver Tip.
3. Person two: Loosen the Height-Adjustment Knob on each
of the VESA Mounts.
4. Person one: Adjust the height of the Monitor to the desired
viewing height.
5. Person two: Adjust both Collars so that each Collar sits
ush with the VESA Mounts. Tighten the two Flat-Head
Screws on each of the Collars, using the 3 mm Hex Key
with Screwdriver Tip.
Note: Do not over-tighten these Screws.