Manualshelf

User Manual

ManualsBrandsStartech ManualsAccessoriesStarTech.com Desk Mount Quad Monitor Arm, Ergonomic VESA 4 Monitor Mount 2x2 up to 27", Articulating & Height Adjustable Pole Mount, Tilt/Swivel/Rotate LCD/LED Screen, Clamp/Grommet Heavy-duty VESA Mount - mounting kit - adjustable arm - for 4 monitors
11121314151617181920
Instruction manual
9
6. Remove the backing from the ve rubber pads (17) and attach them underneath
the top of the desk clamp.
7. Turn the knob on the desk clamp counterclockwise until you reach the thickness of
the desk or table that you’re attaching the ARMQUAD to.
Note: The desk mount can accommodate a desk or table that’s between 10 and 80 mm
(0.4 and 3.1 in.) thick.
8. Slide the desk clamp over the edge of the desk or table (gure 6).
9. Turn the knob clockwise to tighten the desk clamp.
gure 6
Desk clamp
Knob
Use the grommet mount to attach the ARMQUAD
Warning! Make sure that the weight of the monitors doesn’t exceed the weight
capacity of this product. If you exceed the weight capacity, you might experience
personal injury or damage to the product. This product can support the following
weight: Up to 8 kg (17.6 lb.) per monitor mount, for a total of 32 kg (70.4 lb.).
1. Remove the cap from the top of the desk clamp (9). (gure 7)
Cap
Desk clamp
gure 7