User Manual

Instruction manual
11
5. Remove the backing from the ve rubber pads (17) and ax them to the bottom of
the grommet collar (15). (gure 10)
gure 10
Grommet
collar
Rubber pads
6. Screw the lower pole and cap into the top of the grommet collar. (gure 11)
gure 11
Grommet collar
Cap
Pole
7. Use the 3 mm hex key (10) to tighten the screw in the grommet collar, and push
down the cap so that it sits ush again the grommet collar. (gure 12)
gure 12
Grommet collar
Cap
Lower pole
3 mm hex key